Buy Can Am Dual Battery Kit Online Today

Surprising fact: with 18 additional amp hours, long rides feel different for lights and sound. This added capacity powers accessories longer and keeps the starter protected.

A purpose-built 80A isolator links both batteries Key ON and isolates the starter Key OFF so accessories pull from the second battery. Its heavy-duty mount resists vibration/impacts for real off-road use.

Arrives fresh, sealed AGM and fully charged and hardware sized to match your vehicle. The Honda pioneer 1000-5 lift kit setup needs no daily maintenance, but using a charger/maintainer helps prevent sulfation and lengthen life.

Order online for clear fitment data and quick delivery, reducing time from purchase to install. You keep stock starting capacity and gain usable amp-hours for winch, lights, and audio everywhere you ride.

Why Choose a Can-Am Dual Battery Kit for Your Next Adventure

If you run lights and audio late, a second power source keeps the starter prepared. With an 80A isolator, Key ON combines sources; Key OFF isolates the starter so accessories draw from the auxiliary battery.

Run accessories without draining your stock battery

Drive light bars, audio, GPS, and heaters without draining the starter. You get steadier voltage to sensitive electronics, reducing dim and drop during load spikes.

Confident starts with stock battery starting preserved

An isolator-managed system preserves the stock battery so cranking stays strong after long accessory use.

• Reserve capacity: A second battery gives extra amp hours for high-draw gear at camp or on long rides.
• Reduced strain: Accessory offload eases stress on starter circuits and components.
• Smart energy management: No manual switches—key position controls behavior automatically.

Can-Am Dual Battery Kit: Features & Benefits

Practical advantages for real trails and day-to-day reliability. Automatic control plus a rugged mount and sealed cells keep electronics powered while protecting the starter.

The 80 amp battery isolator links both power sources when the key is on and isolates the starter cell when the key is off. Automation prevents accessory drain on the starting battery.

Heavy-duty bracket engineered for shock and vibration

The reinforced mount holds steady across washboard and big landings. It resists loosening and fatigue so the install stays tidy and serviceable.

UTV Stereo Platinum Series AGM: sealed design, maintenance-free, durable

UTV Stereo’s Platinum AGM ships fresh and fully charged. Sealed AGM construction resists spill/vibration and needs no routine maintenance.

Adds extra amp hours vs stock for lights, audio, and accessories

• About +18 amp-hours vs stock for longer light/audio runtime.
• Steadier loaded voltage preserves audio clarity and lamp brightness at idle.
• Complete kit integrates with factory wiring for a neat, durable install.

Model Fitment and Options for Can-Am Owners

Choose the right fit for your UTV with model-specific packages that match factory mounting points and wiring paths.

Maverick X3 owners can opt for a full second-battery kit with wiring/hardware for a quick upgrade. Already own an AGM? UTV Stereo’s mount-only option gives a clean bracket for a tidy install.

Maverick X3: complete 2nd battery kit and dual battery mount

Pick a complete kit for fast setup or the bracket-only path when reusing an existing cell. Either way, you get a factory-style look and secure fit.

Defender: model-fit second battery kit for stock bay

The Defender kit is built to fit the stock space and preserve service access. Factory clearances remain intact while adding reliable auxiliary capacity.

Bracket-only and wiring kits for owners with an AGM

Save by using a wire-and-mount package if you already have a battery. It delivers pro routing and solid mounting without unnecessary parts.

Other Options: DS18 bracket/wire packages and AKJ Offroad kits

• Explore AKJ Offroad for another full package option.
• DS18 lists bracket/wire-only packages with free U.S. shipping advertised.
• Engineered to model geometry for factory-style, trail-secure installs.

Choose the path that matches your build: full kit for convenience, or modular parts to integrate gear you already own. Clear fitment notes reduce wrong orders and help each customer get the right parts the first time.

Kit Contents

Here’s what you receive and how it protects the starter yet feeds accessories.

Opt for a complete package with the secondary AGM or go bracket-only when you already have a compatible cell. Both options protect starting power and add capacity for lights/audio/recovery.

Primary components

• An 80 amp battery isolator relay module to manage charge flow between sources.
• Model-specific harness to limit splices and speed installs.
• Power distribution hardware with fused connection points for clean accessory feeds.
• Bracket, reinforced, to resist shock and vibration.
• Clear documentation for routing/termination of harness and distribution.

Item	Role	Why it matters
Secondary AGM cell	Provides extra amp hours	Keeps starter ready while running accessories
80A isolator relay	Controls charge/isolation	Prevents accessory draw from draining starter
Model harness	Connects components	Easier installs and service access
Distribution block & hardware	Clean accessory feeds	Neat fused circuits for lights and audio

All parts are selected for off-road use and sealed where needed to resist dust and moisture. It integrates with existing charging/accessory circuits for organized, reliable routing.

Installation Made Straightforward

A straightforward install keeps your rig trail-ready without hours in the garage.

Begin with a clean workspace and lay out labeled parts. Mount the reinforced bracket, set the 2nd cell in place, and follow the harness leads to each terminal.

Simple behavior: Key ON/OFF

With the key ON, the 80A isolator links sources; key OFF keeps the starter isolated. This design ensures accessories pull from the auxiliary so the starter remains reserved after long stops.

Solid bracket placement with tidy harness routing

Use factory routing, secure with clips, and sleeve abrasion points. Supplied hardware enables clean grounds and fused feeds—avoid daisy-chains.

Stage	Action	Reason
Mount bracket	Bolt into reinforced points	Handles vibration and maintains clamp load
Place 2nd cell	Seat battery and clamp firmly	Keeps terminals safe and serviceable
Connect harness	Follow labeled leads and fuse points	Simplifies future upgrades and diagnostics

Most DIYers can complete the install with basic tools. Properly rated isolator and cables stabilize delivery and protect the starter on extended rides.

Performance, Charging & Long-Term Care

Robust, steady power sustains aftermarket electronics under load. Routine care and proper charging make performance repeatable each season.

Look for steadier voltage and better results with amps, winches, and powerful lights. A dedicated auxiliary AGM reduces spike-related dips, keeping audio clean and lights bright.

Charger/Maintainer: your sulfation prevention

Regular top-offs with a quality maintainer help prevent sulfation—the main cause of capacity loss in AGM designs. UTV Stereo advises between-trip top-offs to preserve capacity and extend life.

• The system preserves stock battery health by isolating starting power when the key is off.
• When running, the alternator replenishes reserves for efficient recovery on long rides.
• Sealed, vibration-resistant agm battery construction reduces damage from rough terrain.

Area	Benefit	Action
Performance	Steadier voltage under load	Add a secondary AGM to support high-draw gear
Charging	Lower long-term capacity loss	Use a quality charger/maintainer between rides
Long-term care	Extended service life	Pair sealed cells with routine maintenance charging

Pro tip: Have a compatible maintainer ready to keep batteries topped. That reduces surprises and helps preserve next-morning starts on every trip.

Ordering, Support, and Shipping in the U.S.

Quick, dependable shipping helps you schedule installs without surprises.

Order support and fast U.S. shipping on in-stock items

Enjoy fast shipping across the United States so you can upgrade your Can-Am without a long wait. DS18 advertises free shipping on qualifying U.S. orders to speed delivery on lighter packages.

• Get responsive customer support to confirm fitment, inventory, and the right kit for your vehicle.
• Order full kits or go modular with bracket-and-wire options.
• Bundles often include accessory distribution, cutting extra parts sourcing and speeding installs.

Clear product info and documentation help you stage tools before delivery. U.S. fulfillment shortens transit so projects stay on schedule.

Service	Coverage	Benefit
Shipping	Domestic transit speed; DS18 free ship on select	Less downtime; parts arrive sooner
Support	Fitment checks and order status for customers	Prevents wrong orders and speeds a correct install
Product options	Full kit or bracket-only/wire-only choices	Match solution to power goals and budget

Final Thoughts

For owners who want steady power and easy installation, this 2nd source delivers. With a Platinum Series AGM and 80A isolator, you gain ~18 amp-hours over stock while keeping the starter safe.

Select complete kit or bracket-and-wire to fit your budget and schedule. The amp-rated isolator, fused distribution, and clean harness routing make add-ons simple and reliable.

Expect improved charging behavior, stronger light/accessory performance, and fast U.S. shipping with friendly support. Pair the new secondary AGM with a maintainer to preserve life between rides.